The new Micro function decoder by Train-O-Matic, is a welcome addition to the Lokommander II decoder line-up. Its small size of 13 x 9.3 mm and 6 pin connection, make it suitable for many small coaches. The new Micro function decoder is available in different versions, so you can add digital functionality to any coach or car of any age.
On the 6 solder pads there are the track and the classic FL/RL (Out1/Out2) connections, which are 100 mA current capable power outputs. A great feature for power back up are the solder pads for direct connection of external capacitors (25Vdc capacitors are advised, it is not necessary to use higher voltage capacitors). On the opposite side there are 4 logical outputs, capable to drive directly 4 LEDs, without the need of series resistors. There are many light effects for the LEDs to choose from.
Also on the board are Vcc and GND connection pads. If the Train-O-Matic SPP or SPP-N (Powerpack) is used, it has to be connected to the Vcc and GND solder pads and one of the logical outputs must be sacrificed to control the power pack (Charge). The SPP control can be configured in the CVs.
The size of the decoder will allow the usage in N scale, for example with the Train-O-Matic Shine Plus Mini Digi light strips. And of course, the decoder has full RailCom capabilities. A version is available as RailCom transmitter, with only 2 wires connected to the rails.
Awaiting manual
Size of all function decoders: 13 x 9.3 mm
Function Decoders with pins
Full name
FD Micro 6P
FD Micro 6P90
FD Micro 4W6P
FD Micro 5W8P
Interface
NEM 651 6 pin
NEM 651 90 degrees
NEM 651 4 wires 6 pin
NEM 652 8 pin 5 wires
Art. Nr
02010106
02010107
02010108
02010110
Function Decoders with socket
Full name
FD Micro 10WN18
Interface
Next18 NEM 658, 10 wires
Art. Nr
02010111
Function Decoders with wires only
Full name
FD Micro 5W
FD Micro 2W
Interface
Art. Nr
Solder pads and 5 wires
02010109
RailCom transmitter, 2 wires
02010112
.